NSN 5305-00-809-0100
High Torque Screw
Between 4.500 inches and 4.530 inches fastener length, flat countersunk head style, between 0.959 inches and 1.017 inches head diameter, grip diameter: between 0.4985 inches and 0.4995 inches .
Manufacturer part number NAS1208-65D for national stock number 5305008090100.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-809-0100.
-
MPN or Model
NAS1208-65D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.428 inches and 0.478 inches -
Fastener Length
Between 4.500 inches and 4.530 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.959 inches and 1.017 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.500 inches -
Grip Length
Between 4.052 inches and 4.072 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.367 inches first hole and 4.417 inches first hole -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas1208 professional/industrial association standard
More from these suppliers
- 5305-00-390-0186 MPN NAS1189E3P6LSocket Head Cap Screw
- 5305-00-419-0523 MPN 370215-24Externally Relieved Body Screw
- 5306-00-192-4194 MPN NAS1005-6HMachine Bolt
- 5306-00-826-3027 MPN NAS1005-6Machine Bolt
- 5306-00-831-6672 MPN NAS1005-5HMachine Bolt
- 5305-01-028-5695 MPN NAS1123E4HClose Tolerance Screw
- 5305-01-008-4194 MPN NAS1190E04P81Socket Head Cap Screw
- 5320-00-293-5112 MPN NAS1200-3-7Solid Rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-809-0100 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1208-65D | National Aerospace Standards |
NAS1208-65D | Nor-cal Supply Co.inc. |
NAS1208-65D | Hi-shear Corporation |
NAS1208-65D | Sps Technologies, Llc |
NAS1208-65D | Eriks Southwest Inc |
NAS1208-65D | Apcom Inc |
NAS1208-65D | Sps Technologies, Llc |
NAS1208-65D | Lawrence Engineering And Supply Inc |
NAS1208-65D | Collins Engineering Corp |
NAS1208-65D | Durham Aircraft Service Inc |
NAS1208-65D | Air Industries Co Inc |