NSN 5305-00-809-1738
High Torque Screw
Between 1.385 inches and 1.432 inches fastener length, flat countersunk head style, between 0.329 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 51B333-18 for national stock number 5305008091738.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-809-1738.
-
MPN or Model
51B333-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.250 inches and 0.317 inches -
Fastener Length
Between 1.385 inches and 1.432 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.329 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp 8740 or steel comp 4340 or steel comp e4340 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-310-6178 MPN AIC812-02-6Machine Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-00-823-5806 MPN NAS1102-04-8Machine Screw
- 5305-00-915-4768 MPN AIC792-4-6Machine Screw
- 5305-00-927-1989 MPN AIC1652-3-12Close Tolerance Screw
- 5305-00-928-9635 MPN AIC82-5-15Machine Screw
- 5305-01-244-8895 MPN AIC1181C306Close Tolerance Screw
- 5305-01-274-9809 MPN LS15262V3-6Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-809-1738 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B333-18 | Northrop Grumman Technical Services, |
51B333-18 | Sps Technologies, Llc |
51B333-18 | Sps Technologies, Llc |
51B333-18 | Hi-shear Corporation |
51B333-18 | Sps Technologies, Llc |
51B333-18 | Alcoa Global Fasteners, Inc. |
51B333-18 | Lisi Aerospace Canada Corp |
51B333-18 | Northrop Grumman Systems Corporation |