NSN 5305-00-810-6653
Tap Bolt
Between 5.906 inches and 6.000 inches fastener length, between 0.226 inches and 0.243 inches head height, between 0.551 inches and 0.562 inches width between flats, thread diameter: 0.375 inches.
Manufacturer part number 1217-363-5 for national stock number 5305008106653.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-810-6653.
-
MPN or Model
1217-363-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.250 inches -
Fastener Length
Between 5.906 inches and 6.000 inches -
Head Height
Between 0.226 inches and 0.243 inches -
Width Between Flats
Between 0.551 inches and 0.562 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
16 -
Material
Steel -
Material Specification
Sa-320, grade l43, fscm 24374 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
101b-p, fscm 06853 mfr ref single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 4820-00-237-0250 MPN 239773Ported Valve Ball
- 4820-01-085-1880 MPN 238581Special Shaped Actuator Valve Diaphragm
- 4820-00-925-0076 MPN 240011Flat Valve Diaphragm
- 5305-00-058-1945 MPN M41GS440-14CSocket Head Cap Screw
- 5305-00-068-4718 MPN NK515C6-14Socket Head Cap Screw
- 5305-00-771-6931 MPN M37BS256-4CCSocket Head Cap Screw
- 5305-00-816-7846 MPN NKS35233-4Socket Head Cap Screw
- 5305-00-826-8108 MPN AQM60CR1024-16ESocket Head Cap Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-810-6653 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1217-363-5 | Nylok Corporation |
214884 | Bendix Commercial Vehicle Systems |
71924 | Little Giant Crane And Shovel Inc |
Stock Check
- NS: 5
- NE: 19
- SV: 1
- AR: 1