NSN 5305-00-815-3985
High Torque Screw
Between 0.640 inches and 0.687 inches fastener length, flat countersunk head style, between 0.376 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 54291-3-4 for national stock number 5305008153985.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-815-3985.
-
MPN or Model
54291-3-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.380 inches and 0.447 inches -
Fastener Length
Between 0.640 inches and 0.687 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-281-8118 MPN HT8140-4-7Close Tolerance Screw
- 5305-00-541-9344 MPN HT4025L4D14Close Tolerance Screw
- 5305-00-680-5873 MPN BACB30LU4D17Machine Screw
- 5305-01-049-4056 MPN BACB30LL4-2Close Tolerance Screw
- 5305-01-064-6237 MPN SC1711-3-8Machine Screw
- 5305-01-081-3102 MPN ST3M495-4-3-1Shoulder Screw
- 5305-01-102-7955 MPN HT4067-4-6Close Tolerance Screw
- 5305-01-303-6352 MPN SC1823-3-6PClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-815-3985 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
54291-3-4 | Sps Technologies, Llc |
HT1029A3-4 | Arconic Global Fasteners & Rings, |
HT1029A3-4 | Alcoa Fastening Systems |
HT3N-4 | Alcoa Fastening Systems |
HT3N-4 | Hi-shear Corporation |
HT3N-4 | Lisi Aerospace Canada Corp |
HT1029A3-4 | Alcoa Global Fasteners, Inc. |
HT3N-4 | Satair A/s |
3M123-3-4 | Boeing Company, The |