NSN 5305-00-815-5053
High Torque Screw
Between 1.113 inches and 1.143 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS1204-13D for national stock number 5305008155053.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-815-5053.
-
MPN or Model
NAS1204-13D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 1.113 inches and 1.143 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.987 inches first hole and 1.037 inches first hole -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas1204 professional/industrial association standard
More from these suppliers
- 5940-00-045-8693 MPN NAS709T1Stud Terminal
- 5940-01-425-7397 MPN NAS1063A10-330Terminal Board Marker Strip
- 5940-01-451-2574 MPN NAS1063C3-539CTerminal Board Marker Strip
- 5305-00-008-5897 MPN NAS1102C5-14Machine Screw
- 5305-00-008-7856 MPN NAS1742C04T6USocket Head Cap Screw
- 5305-00-009-7721 MPN NAS1190-4P10LSocket Head Cap Screw
- 5305-00-038-8898 MPN NAS1352-02-5Socket Head Cap Screw
- 5305-00-052-5915 MPN MS35198-59Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-815-5053 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1204-13D | National Aerospace Standards |