NSN 5305-00-815-5479
Bolt Stove
Between 1.047 inches and 1.062 inches fastener length, flat countersunk head style, between 0.447 inches and 0.507 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN509-41R16 for national stock number 5305008155479.
Datasheet
-
Product description
Machine Screw NSN 5305-00-815-5479.
-
MPN or Model
AN509-41R16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.500 inches and 0.578 inches -
Fastener Length
Between 1.047 inches and 1.062 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.447 inches and 0.507 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
Between 26.0 rockwell c and 32.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel -
Screw Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-173-7858 MPN AN3102A16S1PWElectrical Receptacle Connector
- 5905-00-193-6696 MPN AN901-4CInductive Wire Wound Fixed Resistor
- 5935-00-224-8150 MPN AN3057-24Electrical Connector Backshell
- 5935-00-241-7160 MPN AN3102M22-19SElectrical Receptacle Connector
- 5935-00-501-5974 MPN AN3102A20-27PXElectrical Receptacle Connector
- 4820-00-528-2356 MPN AN6036-1Check Valve
- 5975-00-548-9557 MPN AN3064-20Conduit Chase Nipple
- 5925-00-104-5761 MPN AN3160-50Circuit Breaker
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-815-5479 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN509-41R16 | Aeronautical Standards Group |
AN509-416R16 | Aeronautical Standards Group |