NSN 5305-00-815-9414
High Torque Screw
Between 1.172 inches and 1.202 inches fastener length, flat countersunk head style, between 0.577 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS1205-13 for national stock number 5305008159414.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-815-9414.
-
MPN or Model
NAS1205-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.350 inches and 0.400 inches -
Fastener Length
Between 1.172 inches and 1.202 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Slot -
Thread Diameter
0.312 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1205 professional/industrial association standard
More from these suppliers
- 5305-00-680-5429 MPN NAS1204-52Close Tolerance Screw
- 5305-01-080-6610 MPN NAS1014-34AHexagon Head Cap Screw
- 5305-00-557-8293 MPN NAS1209-9Close Tolerance Screw
- 5305-01-023-8192 MPN NAS1191-04T3BSocket Head Cap Screw
- 5305-01-023-8193 MPN NAS1191-04T4BSocket Head Cap Screw
- 5305-01-082-2203 MPN NAS1189E3P8LSocket Head Cap Screw
- 5306-00-997-5911 MPN NAS1003-18HMachine Bolt
- 5305-00-680-6395 MPN NAS1203-5Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-815-9414 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1205-13 | Eriks Southwest Inc |
NAS1205-13 | Apcom Inc |
NAS1205-13 | Nor-cal Supply Co.inc. |
NAS1205-13 | National Aerospace Standards |
NAS1205-13 | Hi-shear Corporation |
NAS1205-13 | Sps Technologies, Llc |
NAS1205-13 | Lisi Aerospace Canada Corp |
NAS1205-13 | Alcoa Fastening Systems |
NAS1205-13 | Sps Technologies, Llc |
NAS1205-13 | Lawrence Engineering And Supply Inc |
NAS1205-13 | F And C Sales Inc |
NAS1205-13 | Collins Engineering Corp |
NAS1205-13 | Durham Aircraft Service Inc |
NAS1205-13 | Air Industries Co Inc |