NSN 5305-00-815-9421
High Torque Screw
Between 1.548 inches and 1.578 inches fastener length, flat countersunk head style, between 0.577 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS1205-19 for national stock number 5305008159421.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-815-9421.
-
MPN or Model
NAS1205-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.350 inches and 0.400 inches -
Fastener Length
Between 1.548 inches and 1.578 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.312 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas1205 professional/industrial association standard
More from these suppliers
- 5935-01-080-8127 MPN NAS1652R16B26PNElectrical Receptacle Connector
- 5305-00-007-9894 MPN NAS1102C04-10PMachine Screw
- 5305-00-021-7093 MPN MS21295-55Socket Head Cap Screw
- 5305-00-051-8605 MPN MS16995-77Socket Head Cap Screw
- 5305-00-053-1093 MPN MS35199-71Machine Screw
- 5305-00-144-9844 MPN NAS1191E04P4LKSocket Head Cap Screw
- 5305-00-203-1253 MPN NAS1635-04-18Machine Screw
- 5305-00-205-3596 MPN MS51958-67BMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-815-9421 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1205-19 | National Aerospace Standards |
Stock Check
- NS: 635
- NE: 973