NSN 5305-00-816-1716
High Torque Screw
Between 2.063 inches and 2.093 inches fastener length, flat countersunk head style, between 0.832 inches and 0.890 inches head diameter, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number NAS1207-26 for national stock number 5305008161716.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-816-1716.
-
MPN or Model
NAS1207-26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.428 inches and 0.478 inches -
Fastener Length
Between 2.063 inches and 2.093 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.832 inches and 0.890 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.438 inches -
Grip Length
Between 1.615 inches and 1.635 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1207 professional/industrial association standard
More from these suppliers
- 5305-00-150-3085 MPN NAS1191C02P4Socket Head Cap Screw
- 5306-01-050-4976 MPN NAS1005-54AMachine Bolt
- 5305-00-823-5807 MPN NAS1102-04-10Machine Screw
- 5305-00-881-0692 MPN NAS1190-08T8LSocket Head Cap Screw
- 5320-00-977-9398 MPN NAS1198-6-4Solid Rivet
- 5305-00-420-6449 MPN NAS1133V3Close Tolerance Screw
- 5305-00-541-9045 MPN NAS1221-3-2Machine Screw
- 5305-00-660-3149 MPN NAS1203-12Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-816-1716 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1207-26 | National Aerospace Standards |
NAS1207-26 | Sps Technologies, Llc |
NAS1207-26 | Nor-cal Supply Co.inc. |
NAS1207-26 | Eriks Southwest Inc |
NAS1207-26 | Apcom Inc |
NAS1207-26 | Hi-shear Corporation |
NAS1207-26 | Lisi Aerospace Canada Corp |
NAS1207-26 | Sps Technologies, Llc |
NAS1207-26 | Lawrence Engineering And Supply Inc |
NAS1207-26 | F And C Sales Inc |
NAS1207-26 | Collins Engineering Corp |
NAS1207-26 | Durham Aircraft Service Inc |
NAS1207-26 | Air Industries Co Inc |