NSN 5305-00-816-3198
High Torque Screw
Between 1.828 inches and 1.875 inches fastener length, 160000 pounds per square inch min. tensile strength (psi), 32.0 microinches threads surface finish, material: steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 .
Manufacturer part number NAS587-19 for national stock number 5305008163198.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-816-3198.
-
MPN or Model
NAS587-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Length
0.656 inches -
Fastener Length
Between 1.828 inches and 1.875 inches -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response
More from these suppliers
- 5305-00-138-9907 MPN NAS1133V34Close Tolerance Screw
- 5305-00-182-9355 MPN NAS1351-3-20Socket Head Cap Screw
- 5305-00-186-9234 MPN NAS1352-02LL4PSocket Head Cap Screw
- 5305-00-282-5546 MPN MILS7839Machine Screw
- 5305-00-282-6686 MPN NAS221-32Machine Screw
- 5305-00-323-3183 MPN NAS1623-25Machine Screw
- 5305-00-372-6339 MPN NAS1218-3V2Machine Screw
- 5305-00-443-6768 MPN NAS1633-13DMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-816-3198 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS587-19 | National Aerospace Standards |