NSN 5305-00-816-3199
High Torque Screw
Between 1.890 inches and 1.937 inches fastener length, flat countersunk head style, between 0.881 inches and 0.888 inches head diameter, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number NAS587-20 for national stock number 5305008163199.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-816-3199.
-
MPN or Model
NAS587-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.656 inches -
Fastener Length
Between 1.890 inches and 1.937 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.881 inches and 0.888 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.437 inches -
Grip Length
1.250 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas587 professional/industrial association standard
More from these suppliers
- 5940-01-354-9986 MPN NAS1063A12-1001Terminal Board Marker Strip
- 5940-01-380-6763 MPN NAS1063B81-100Terminal Board Marker Strip
- 5305-00-006-2267 MPN NAS1352C02-10Socket Head Cap Screw
- 5305-00-058-4019 MPN MS24694S121Machine Screw
- 5305-00-116-5024 MPN NAS1100C6-16Machine Screw
- 5305-00-165-5359 MPN NAS221-11Machine Screw
- 5305-00-244-2878 MPN NAS1404-10Machine Screw
- 5305-00-267-8973 MPN MS90726-4Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-816-3199 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS587-20 | National Aerospace Standards |