NSN 5305-00-820-1214
High Torque Screw
Between 0.761 inches and 0.791 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1995 inches .
Manufacturer part number NAS1203-8 for national stock number 5305008201214.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-820-1214.
-
MPN or Model
NAS1203-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.7 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.761 inches and 0.791 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1995 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.500 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification all treatment responses -
Thread Series Designator
Unf -
Specification Data
80205-nas1203 professional/industrial association standard
More from these suppliers
- 5305-00-008-3701 MPN NAS1122-9Close Tolerance Screw
- 5305-01-026-0831 MPN NAS1121-25HClose Tolerance Screw
- 5305-00-127-5680 MPN NAS1189-08P10Socket Head Cap Screw
- 5305-00-150-0846 MPN NAS1189E02T14LSocket Head Cap Screw
- 5305-00-917-2586 MPN NAS1101C3-16Machine Screw
- 5305-01-025-1345 MPN NAS1101E06-8Machine Screw
- 5305-01-082-0142 MPN NAS1134E10Close Tolerance Screw
- 5306-00-827-3566 MPN NAS1004-52Machine Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-820-1214 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1203-8 | Alcoa Fastening Systems |
NAS1203-8 | National Aerospace Standards |
NAS1203-8 | Nor-cal Supply Co.inc. |
NAS1203-8 | Hi-shear Corporation |
NAS1203-8 | Sps Technologies, Llc |
NAS1203-8 | Eriks Southwest Inc |
NAS1203-8 | Apcom Inc |
NAS1203-8 | Sps Technologies, Llc |
NAS1203-8 | Lawrence Engineering And Supply Inc |
NAS1203-8 | Collins Engineering Corp |
NAS1203-8 | Durham Aircraft Service Inc |
NAS1203-8 | Air Industries Co Inc |