NSN 5305-00-821-2839
High Torque Screw
Between 0.761 inches and 0.791 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1153-8 for national stock number 5305008212839.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-821-2839.
-
MPN or Model
NAS1153-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.761 inches and 0.791 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.192 inches -
Grip Length
0.500 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification all treatment responses -
Thread Series Designator
Unjf -
Specification Data
80205-nas1153 professional/industrial association standard
More from these suppliers
- 5940-01-446-4551 MPN NAS1063A13-125Terminal Board Marker Strip
- 1680-01-517-0717 MPN NAS1338A5C15DAircr Swing Arm Pin
- 5305-00-008-9116 MPN NAS1190E04T3LSocket Head Cap Screw
- 5305-00-146-2686 MPN MS27039-0837Machine Screw
- 5305-00-150-3319 MPN NAS1135C6Close Tolerance Screw
- 5305-00-170-2931 MPN NAS1352C8-10Socket Head Cap Screw
- 5305-00-205-3597 MPN MS51958-71BMachine Screw
- 5305-00-269-3213 MPN MS90725-62Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-821-2839 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1153-8 | National Aerospace Standards |
7S35-3A8 | Rockwell International Corp |
10114584 | Nimikkeistokeskus Ncb Finland |