NSN 5305-00-821-9206
Bolt Stove
Between 0.220 inches and 0.250 inches fastener length, flat countersunk head style, between 0.156 inches and 0.172 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number NAS662C2-4 for national stock number 5305008219206.
Datasheet
-
Product description
Machine Screw NSN 5305-00-821-9206.
-
MPN or Model
NAS662C2-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.214 inches and 0.250 inches -
Fastener Length
Between 0.220 inches and 0.250 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.156 inches and 0.172 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.086 inches -
Thready Qty Per Inch (tpi)
56 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 302 or steel comp 303 or steel comp 321 or steel comp 347 -
Screw Material Specification
Mil-s-7720 military specification 1st material response or mil-s-7720 military specification 2nd material response or qq-s-763 federal specification 3rd material response or qq-s-763 federal specification 4th material response -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5950-00-085-3349 MPN 1783709-32Audio Frequency Transformer
- 5905-01-011-9484 MPN 2500169-435Film Fixed Resistor
- 5950-01-330-8655 MPN 2557458-001Electrical Coil
- 5905-01-389-7865 MPN 4027433-6Film Fixed Resistor
- 1680-01-428-3573 MPN L109CBMLinear Electro-mechanical Actuator
- 1680-01-546-1178 MPN 8522789-6Ma Aircraft Encoder
- 5905-01-012-1204 MPN 2500482-96Film Fixed Resistor
- 5950-01-104-4441 MPN 1783709-5Audio Frequency Transformer
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-821-9206 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS662C2-4 | National Aerospace Standards |
2503464-62 | Honeywell International Inc. |
Stock Check
- NE: 9727
- NS: 1234