NSN 5305-00-822-3825
Tap Bolt
3.750 inches fastener length, hexagon head style, between 0.150 inches and 0.163 inches head height, width between flats: between 0.428 inches and 0.437 inches .
Manufacturer part number 273341 for national stock number 5305008223825.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-822-3825.
-
MPN or Model
273341
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.562 inches and 0.938 inches -
Fastener Length
3.750 inches -
Head Style
Hexagon -
Head Height
Between 0.150 inches and 0.163 inches -
Width Between Flats
Between 0.428 inches and 0.437 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Hardness Rating
32.0 rockwell c and 38.0 rockwell c -
Material
Steel comp 1335 or steel comp 4047 or steel comp 3135 or steel comp 4135 -
Material Specification
Qq-s-624 federal specification all material responses -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-259-4684 MPN 8113757Electrical Connector Insert
- 4920-00-509-5626 MPN 6796365Air Inlet Engine Test Duct
- 5940-00-553-2782 MPN 8599116-010Grounding Metallic Shielded Cable Ferrule
- 5905-00-737-2060 MPN 1910176Inductive Wire Wound Fixed Resistor
- 5950-00-755-9362 MPN 7949048Power Transformer
- 5950-00-518-2057 MPN 6514652Reactor
- 4920-00-707-4623 MPN 6796783Curvic Co Protector
- 5305-00-012-0668 MPN 120668Hexagon Head Cap Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-822-3825 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
273341 | General Motors Llc |
273341 | General Motors Corp |