NSN 5305-00-823-5919
High Torque Screw
Between 1.066 inches and 1.096 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS2804-10 for national stock number 5305008235919.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-823-5919.
-
MPN or Model
NAS2804-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.456 inches -
Fastener Length
Between 1.066 inches and 1.096 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
0.625 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas2804 professional/industrial association standard
More from these suppliers
- 1680-01-501-4656 MPN NAS43DD8-62FCAircr Sleeve Spacer
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5305-00-057-0536 MPN NASM51958Machine Screw
- 5305-00-064-3627 MPN NAS560XK2-8Machine Screw
- 5305-00-074-4437 MPN NAS623-3-50Machine Screw
- 5305-00-079-2588 MPN NAS1154-29Close Tolerance Screw
- 5305-00-079-2589 MPN NAS1154-11Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-823-5919 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2804-10 | National Aerospace Standards |
NAS2804-10 | National Aerospace Standards |
NAS2804-10 | National Aerospace Standards |
NAS2804-10 | National Aerospace Standards |
NAS2804-10 | National Aerospace Standards |