NSN 5305-00-824-2760
Panel Screw
4.480 inches fastener length, flat chamfer head style, 0.190 inches head diameter, head height: 0.380 inches .
Manufacturer part number G6775-110 for national stock number 5305008242760.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-824-2760.
-
MPN or Model
G6775-110
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.310 inches -
Fastener Length
4.480 inches -
Head Style
Flat chamfer -
Head Diameter
0.190 inches -
Head Height
0.380 inches -
First Diameter From Head
0.120 inches -
Second Diameter From Head
0.250 inches -
Third Diameter From Head
0.100 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
3.730 inches -
Distance From Largest Bearing Surface Of Head To End Of Second Diameter
3.790 inches -
Distance From Largest Bearing Surface Of Head To End Of Third Diameter
4.170 inches -
Internal Drive Style
Slot -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Externally Relieved Body Diameter Quantity
1 -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 1010 -
Material Specification
Qq-s-634 federal specification single material response -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-005-8930 MPN 224816-319Film Fixed Resistor
- 5930-00-146-4441 MPN 230529-065Rotary Switch
- 5950-00-233-5024 MPN 209929-000Radio Frequency Coil
- 5930-00-233-5059 MPN 230395-000-001Thermostatic Switch
- 5935-00-755-3566 MPN 129553-000Electrical Receptacle Connector
- 5905-00-782-4103 MPN 200265-075Composition Fixed Resistor
- 5905-00-941-4710 MPN 200038-222Film Fixed Resistor
- 5905-01-205-1460 MPN 224708-072Film Fixed Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-824-2760 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
G6775-110 | Bae Systems Information And |
G6775-110 | Bae Systems Information And |