NSN 5305-00-824-7354
Bolt Stove
Between 0.972 inches and 1.002 inches fastener length, flat countersunk head style, between 0.389 inches and 0.394 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number 7S39-4A9 for national stock number 5305008247354.
Datasheet
-
Product description
Machine Screw NSN 5305-00-824-7354.
-
MPN or Model
7S39-4A9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 0.972 inches and 1.002 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.389 inches and 0.394 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 4130 -
Screw Material Specification
Mil-s-6758 military specification single material response -
Screw Surface Treatment
Cadmium and chromate -
Screw Surface Treatment Specification
Qq-p-416, type 2class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-035-4010 MPN 192-17205-2Aircraft Leading Edge
- 1560-00-186-8120 MPN 170-23420Horizontal Sta Pin
- 1560-00-338-1538 MPN 170-22073Elevator Rib Assy
- 1560-00-447-6117 MPN 265-524020-21Pedal Hanger Arm
- 1560-00-476-1597 MPN 265-300039-501Fuselage Door Assembly
- 4920-00-546-6751 MPN E4580Rubber Act Test Kit
- 5905-00-661-0741 MPN 414R1B6801FFilm Fixed Resistor
- 1560-00-979-4440 MPN 265-530135-32Entrance Handrail
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-824-7354 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7S39-4A9 | Boeing Company, The |