NSN 5305-00-825-7595
High Torque Screw
Between 0.448 inches and 0.478 inches fastener length, flat countersunk head style, between 0.280 inches and 0.338 inches head diameter, locking feature: strip threads.
Manufacturer part number NAS1162-2LW for national stock number 5305008257595.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-825-7595.
-
MPN or Model
NAS1162-2LW
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.313 inches and 0.363 inches -
Fastener Length
Between 0.448 inches and 0.478 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.280 inches and 0.338 inches -
Locking Feature
Strip threads -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 fastener or steel comp e4340 fastener or steel comp 8740 fastener -
Material Specification
Mil-s-5626 military specification 1st material response fastener or mil-s-5000 military specification 2nd material response fastener or mil-s-6049 military specification 3rd material response fastener -
Surface Treatment
Cadmium fastener and chromate fastener -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response fastener -
Thread Series Designator
Unjc -
Specification Data
80205-nas1162 professional/industrial association standard
More from these suppliers
- 5940-00-754-8636 MPN NAS706S3Feedthru Terminal
- 5940-00-926-0022 MPN NAS705E4Stud Terminal
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5940-01-664-5697 MPN NAS1063A2-107DLTerminal Board Marker Strip
- 5305-00-068-9167 MPN NASM35202-73Machine Screw
- 5305-00-071-2221 MPN MS35199-52Machine Screw
- 5305-00-071-2222 MPN MS35199-54Machine Screw
- 5305-00-140-4860 MPN NAS1096-1-56Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-825-7595 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1162-2LW | National Aerospace Standards |