NSN 5305-00-837-3684
Bolt Stove
Between 0.385 inches and 0.415 inches fastener length, flat countersunk head style, between 0.297 inches and 0.302 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number 7S39-3A1 for national stock number 5305008373684.
Datasheet
-
Product description
Machine Screw NSN 5305-00-837-3684.
-
MPN or Model
7S39-3A1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.313 inches and 0.363 inches -
Fastener Length
Between 0.385 inches and 0.415 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.297 inches and 0.302 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 4130 -
Screw Material Specification
Mil-s-6758 military specification single material response -
Screw Surface Treatment
Cadmium and chromate -
Screw Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-123-1586 MPN 36-43016Bellcrank Assemblyx
- 1560-00-166-3739 MPN 88-52575-2Trim Tab Contro Rod
- 5930-00-548-7460 MPN 8C4-3Electrical Switch Cover
- 1560-00-620-2649 MPN 55-16031-4Ailero Bracket Assy
- 1560-00-906-8076 MPN 265-240417-3Aircraft Structural Component Support
- 1560-00-960-0635 MPN 265-346124Trunnion Cap Collar
- 1560-01-165-2029 MPN L4801560-001Vent Tube Manifold
- 4820-01-166-4282 MPN L5871052-003Valve Disk
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-837-3684 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7S39-3A1 | Boeing Company, The |