1-321-802-5889
Email Us

NSN 5305-00-837-3701

High Torque Screw

About this product

Between 1.285 inches and 1.315 inches fastener length, flat countersunk head style, between 0.389 inches and 0.394 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .

Manufacturer part number 7S39-4-14 for national stock number 5305008373701.

Datasheet

  • Product description

    Close Tolerance Screw NSN 5305-00-837-3701.

  • MPN or Model

    7S39-4-14

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.400 inches and 0.450 inches
  • Fastener Length
    Between 1.285 inches and 1.315 inches
  • Head Style
    Flat countersunk
  • Head Diameter
    Between 0.389 inches and 0.394 inches
  • Grip Diameter
    Between 0.2485 inches and 0.2495 inches
  • Shank Unthreaded Hole Diameter
    0.076 inches first hole and 0.086 inches first hole
  • Internal Drive Style
    Offset cruciform (torque set)
  • Thread Diameter
    0.250 inches
  • Grip Length
    Between 0.865 inches and 0.885 inches
  • Thready Qty Per Inch (tpi)
    28
  • Min. Tensile Strength (psi)
    160000 pounds per square inch
  • Hardness Rating
    36.0 rockwell c and 40.0 rockwell c
  • Countersink Angle
    100.0 degrees
  • Distance From Head Largest Bearing Surface To Shank Hole Center
    1.179 inches first hole and 1.189 inches first hole
  • Part Name Assigned By Controlling Agency
    Navy special project
  • Material
    Steel comp 4130
  • Surface Treatment
    Cadmium
  • Thread Series Designator
    Unf
More from these suppliers
Close Tolerance Screw

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Mechanic Bill explains High Torque Screw

Pricing and Availability

Get a quote for 5305-00-837-3701 close tolerance screw
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5305008373701

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
7S39-4-14 Boeing Company, The
7S39-4-14 Boeing Company, The
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.