NSN 5305-00-838-3289
High Torque Screw
Between 0.511 inches and 0.541 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1503-4W for national stock number 5305008383289.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-838-3289.
-
MPN or Model
NAS1503-4W
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.511 inches and 0.541 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4130 -
Material Specification
Mil-s-6758 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas1503 professional/industrial association standard
More from these suppliers
- 5305-00-008-2104 MPN NAS1100E02-6PMachine Screw
- 5305-00-016-8175 MPN MS27039-5-27Machine Screw
- 5305-00-218-5109 MPN NAS1635-06-32Machine Screw
- 5305-00-269-3218 MPN MS90725-68Hexagon Head Cap Screw
- 5305-00-282-0146 MPN MILS7839Machine Screw
- 5305-00-341-7107 MPN NAS1623E18Machine Screw
- 5305-00-546-4707 MPN NAS1218-3-11TClose Tolerance Screw
- 5305-00-587-6602 MPN NAS1352-4-22Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-838-3289 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1503-4W | National Aerospace Standards |