NSN 5305-00-839-1488
Tap Bolt
0.750 inches fastener length, hexagon head style, between 0.226 inches and 0.243 inches head height, width between flats: between 0.551 inches and 0.562 inches .
Manufacturer part number MS51094-58 for national stock number 5305008391488.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-839-1488.
-
MPN or Model
MS51094-58
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.750 inches -
Fastener Length
0.750 inches -
Head Style
Hexagon -
Head Height
Between 0.226 inches and 0.243 inches -
Width Between Flats
Between 0.551 inches and 0.562 inches -
Hole Diameter
0.062 inches -
Thread Diameter
0.375 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
23.0 rockwell c and 32.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Hole Configuration Style
Hexagon flats -
Material
Steel -
Material Specification
Sae gr 5 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-082-4663 MPN MS27249-2B3Terminal Board
- 5935-00-119-1440 MPN MS3402D40-62PWElectrical Receptacle Connector
- 5940-00-143-4777 MPN MS25036-57Lug Terminal
- 5935-00-231-1744 MPN MS3106B36-1SElectrical Plug Connector
- 5905-00-257-9402 MPN MS35045-242Composition Fixed Resistor
- 5935-00-261-6879 MPN MS27508E16AG8PAElectrical Receptacle Connector
- 5905-00-279-2624 MPN MS35044-181Composition Fixed Resistor
- 5935-00-280-2100 MPN MS3102C28-2PElectrical Receptacle Connector
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-839-1488 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS51094-58 | Military Standards |