NSN 5305-00-841-2291
High Torque Screw
Between 2.188 inches and 2.235 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number HT195-6-27 for national stock number 5305008412291.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-841-2291.
-
MPN or Model
HT195-6-27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.490 inches and 0.557 inches -
Fastener Length
Between 2.188 inches and 2.235 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 1.678 inches and 1.698 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-126-7640 MPN T150-08-8Machine Screw
- 5305-00-261-4290 MPN NAS1101-06-14Machine Screw
- 5305-00-354-4510 MPN HT4024L3-7Close Tolerance Screw
- 5305-00-401-4736 MPN NAS1101E04H10Machine Screw
- 5305-00-778-2648 MPN NAS1102-08-4Machine Screw
- 5305-00-823-5913 MPN NAS1190-08P7LSocket Head Cap Screw
- 5305-00-891-1730 MPN HS2623-4Z-11YClose Tolerance Screw
- 5305-00-939-0889 MPN NAS1134C2Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-841-2291 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT195-6-27 | Hi-shear Corporation |
HS2623-6Z27 | Huck International, Inc. |
HT195-6-27 | Lisi Aerospace Canada Corp |
3M263-6-27 | Boeing Company, The |
HS2623-6Z27 | Huck Intl Inc |
66117H6-27 | Sps Technologies Inc |
HT195-6-27 | Hi-shear Corporation |
3M263-6-27 | Boeing Company, The |
66117H6-27 | Sps Technologies Inc |
HS2623-6Z27 | Huck Intl Inc |