NSN 5305-00-841-5181
Tap Bolt
0.500 inches fastener length, between 0.150 inches and 0.163 inches head height, between 0.428 inches and 0.438 inches width between flats, hole diameter: 0.062 inches .
Manufacturer part number MS18154-3 for national stock number 5305008415181.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-841-5181.
-
MPN or Model
MS18154-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
0.500 inches -
Head Height
Between 0.150 inches and 0.163 inches -
Width Between Flats
Between 0.428 inches and 0.438 inches -
Hole Diameter
0.062 inches -
Thread Diameter
0.250 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Hardness Rating
32.0 rockwell c and 38.0 rockwell c -
Minimum Yield Strength
120000 pounds per square inch -
Hole Configuration Style
Hexagon flats -
Material
Steel -
Material Specification
Sae gr 8 assn standard single material response -
Surface Treatment
Phosphate -
Surface Treatment Specification
Mil-c-16232, type 2 military specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5940-00-082-4642 MPN MS18029-1S-8Terminal Board Cover
- 4820-00-088-9751 MPN MS29529-12Poppet Drain Cock
- 5975-00-096-2719 MPN MS17848PC2Junction Box
- 5905-00-100-4802 MPN MS35049-35Inductive Wire Wound Fixed Resistor
- 5935-00-105-7421 MPN MS16108-6CTip Jack
- 5935-00-222-7838 MPN MS3106B40-1PElectrical Plug Connector
- 5935-00-253-2899 MPN MS3470L14-12SElectrical Receptacle Connector
- 5935-00-259-1103 MPN MS3108B22-4PElectrical Plug Connector
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
![Mechanic Bill explains Tap Bolt](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-00-841-5181 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS18154-3 | Zf Industrieantriebe Witten Gmbh |
MS51097-3 | Military Standards |
Stock Check
![](/public/images/partscage_shelf3.png)
- NS: 199
- NE: 1813