NSN 5305-00-842-1581
High Torque Screw
Retaining element in shank.
Manufacturer part number AS104-04-22 for national stock number 5305008421581.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-842-1581.
-
MPN or Model
AS104-04-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.290 inches -
Fastener Length
Between 1.813 inches and 1.853 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.3737 inches and 0.3742 inches -
Head Height
0.263 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches all holes and 0.086 inches all holes -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 1.375 inches and 1.395 inches -
Width Across Flats
Between 0.187 inches and 0.190 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.099 inches all holes and 0.119 inches all holes -
Material
Steel comp 440c -
Thread Series Designator
Unf
More from these suppliers
- 1560-01-087-5062 MPN 43624-17Keeper Assembly
- 5305-00-894-8414 MPN CA1071-04Shoulder Screw
- 5305-00-963-1343 MPN CA1105-23Shoulder Screw
- 5305-01-073-7010 MPN CA2840B9HSPanel Screw Assembly
- 5305-01-081-0752 MPN CA-2848-11PPanel Screw Assembly
- 5305-01-143-6542 MPN CA13180-3-10PPanel Screw Assembly
- 5305-01-478-7804 MPN CA22018-10-2-12Panel Fastene Screw
- 1560-00-084-7606 MPN 12B5846-7Glove Fairing Seal
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-842-1581 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS104-04-22 | Avibank Mfg., Inc. |
CC00035-4-22 | Lockheed Martin Corporation |
CA2730-4-22 | Arconic Global Fasteners & Rings, |