NSN 5305-00-842-1597
High Torque Screw
Retaining element in shank.
Manufacturer part number AS104-04-44 for national stock number 5305008421597.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-842-1597.
-
MPN or Model
AS104-04-44
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.290 inches -
Fastener Length
Between 3.188 inches and 3.228 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.3737 inches and 0.3742 inches -
Head Height
0.263 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches all holes and 0.086 inches all holes -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 2.750 inches and 2.770 inches -
Width Across Flats
Between 0.187 inches and 0.190 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.099 inches all holes and 0.119 inches all holes -
Surface Finish
32.0 microinches threads -
Material
Steel comp 440c -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-964-0317 MPN CA2896-6SKPanel Screw Assembly
- 5306-00-121-8844 MPN CA4510-4-10Close Tolerance Bolt
- 5306-01-312-4948 MPN CA21107-6-4HSInternally Relieved Body Bolt
- 5935-00-167-7812 MPN C136-9-1SElectrical Plug Connector
- 5935-00-167-7818 MPN C2095-28-11SElectrical Plug Connector
- 1560-00-436-0372 MPN 12Y480-803Air Duct Tube Elbow
- 1560-00-575-9243 MPN 12W8485-33Track Guide
- 1560-00-829-2105 MPN 12W6186-10Slat Track Stop
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-842-1597 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS104-04-44 | Avibank Mfg., Inc. |
CC00035-4-44 | Lockheed Martin Corporation |
CA2730-4-44 | Arconic Global Fasteners & Rings, |