NSN 5305-00-842-7561
High Torque Screw
Between 1.250 inches and 1.297 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number 66117H6-12 for national stock number 5305008427561.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-842-7561.
-
MPN or Model
66117H6-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.490 inches and 0.557 inches -
Fastener Length
Between 1.250 inches and 1.297 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-262-3240 MPN E125-206Machine Screw
- 5305-00-279-1855 MPN HT4025L4-22Close Tolerance Screw
- 5305-01-015-5225 MPN BM19031-4-14DClose Tolerance Screw
- 5305-01-045-4306 MPN HT4016-4-7YShoulder Screw
- 5305-01-088-5862 MPN DFPQ-7900-8-A-2.5Panel Screw Assembly
- 5305-01-112-4352 MPN HLT4024L3D5-1Close Tolerance Screw
- 5305-01-197-8272 MPN HT4053-4D12AClose Tolerance Screw
- 5305-01-240-2649 MPN E033-0606Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-842-7561 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
66117H6-12 | Sps Technologies, Llc |
66117H6A12 | Sps Technologies, Llc |
HS2623-6Z12 | Huck International, Inc. |
HT195-6-12 | Alcoa Fastening Systems |
HT195-6-12 | Hi-shear Corporation |
HT195-6-12 | Lisi Aerospace Canada Corp |
3M263-6-12 | Boeing Company, The |
HT195-6-12 | Satair A/s |
66117H6-12 | Sps Technologies Inc |
HS2623-6Z12 | Huck Intl Inc |
HS2623-6Z-12 | Precision Fastening Sub Omark |