NSN 5305-00-850-0139
Panel Screw
0.750 inches fastener length, fillister head style, between 0.250 inches and 0.270 inches head diameter, head height: between 0.106 inches and 0.113 inches .
Manufacturer part number N2562-42539-1 for national stock number 5305008500139.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-850-0139.
-
MPN or Model
N2562-42539-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.312 inches -
Fastener Length
0.750 inches -
Head Style
Fillister -
Head Diameter
Between 0.250 inches and 0.270 inches -
Head Height
Between 0.106 inches and 0.113 inches -
Hole Diameter
0.047 inches -
First Diameter From Head
Between 0.125 inches and 0.131 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.438 inches -
Internal Drive Style
Slot -
Thread Diameter
0.164 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
70000 pounds per square inch -
Hole Configuration Style
Round longitudinal hole -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 303 -
Material Specification
Qq-s-763 federal specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unc
More from these suppliers
- 5930-00-049-9744 MPN 90056-1Switch Assembly
- 5930-00-446-4826 MPN 318298-1Push Switch
- 5935-00-459-9640 MPN 513363-1Electrical Receptacle Connector
- 4820-01-352-9347 MPN 11-61908-11Tee Valve
- 5930-00-862-5582 MPN N2562-43753-1Electrical Switch Yoke
- 6110-00-910-6530 MPN 409556-1Motor Starter
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-850-0139 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
N2562-42539-1 | Naval Air Warfare Center Aircraft |
2562-42539-1 | Unisys Corp |