NSN 5305-00-857-1462
High Torque Screw
Between 0.765 inches and 0.812 inches fastener length, flat countersunk head style, between 0.447 inches and 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number 1819823 for national stock number 5305008571462.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-857-1462.
-
MPN or Model
1819823
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093460 - Bolts/nuts NOI Bbc/zinc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.366 inches and 0.516 inches -
Fastener Length
Between 0.765 inches and 0.812 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.447 inches and 0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.296 inches and 0.328 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5985-00-252-2613 MPN 2920084-005Directional Coupler
- 5950-00-256-5801 MPN 417473PC1Power Transformer
- 5935-00-259-1981 MPN 971351Electrical Plug Connector
- 5985-00-291-0765 MPN 2921157Transmission Line Coupler
- 5940-00-311-4018 MPN BA53615ISSUE1Lug Terminal
- 5935-00-350-6111 MPN 2495462-2Electrical Receptacle Connector
- 5935-00-406-9160 MPN 2433170-2Tip Jack
- 5930-00-548-8306 MPN 710046Rotary Switch
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-857-1462 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1819823 | Navair And Navsea Managed |