NSN 5305-00-862-2000
Panel Screw
Furnished with washer on threaded end.
Manufacturer part number 546-8188-003 for national stock number 5305008622000.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-862-2000.
-
MPN or Model
546-8188-003
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.407 inches and 0.438 inches -
Fastener Length
2.294 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.235 inches and 0.245 inches -
First Diameter From Head
Between 0.115 inches and 0.119 inches -
Second Diameter From Head
Between 0.139 inches and 0.145 inches -
Third Diameter From Head
Between 0.224 inches and 0.244 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.294 inches -
Distance From Largest Bearing Surface Of Head To End Of Second Diameter
1.794 inches -
Distance From Largest Bearing Surface Of Head To End Of Third Diameter
1.856 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Externally Relieved Body Diameter Quantity
3 -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 430 -
Surface Treatment
Passivate -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-018-0947 MPN 714-2797-000Thermal Resistor
- 5930-00-078-2162 MPN 269-2439-000Rotary Switch Section
- 5905-00-085-0179 MPN 745-9456-00Composition Fixed Resistor
- 5935-00-089-4442 MPN 357-9348-000Electrical Connector Cover
- 5930-00-126-7307 MPN 259-2607-010Rotary Switch
- 5905-00-153-4591 MPN 705-1475-060Film Fixed Resistor
- 5950-00-170-9769 MPN 240-2030-00Radio Frequency Coil
- 5950-00-170-9770 MPN 240-2038-000Radio Frequency Coil
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-862-2000 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
546-8188-003 | Rockwell Collins, Inc. |
546-8188-003 | Rockwell Collins, Inc. |
546-8188-003 | Rockwell Collins, Inc. |
546-8188-003 | Rockwell Collins, Inc. |