NSN 5305-00-880-9448
High Torque Screw
Between 0.447 inches and 0.494 inches fastener length, flat countersunk head style, between 0.270 inches and 0.302 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 3-3 for national stock number 5305008809448.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-880-9448.
-
MPN or Model
3-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.250 inches and 0.317 inches -
Fastener Length
Between 0.447 inches and 0.494 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.270 inches and 0.302 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.192 inches -
Grip Length
Between 0.177 inches and 0.197 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.5 degrees and 100.5 degrees -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-562-2594 MPN HST12SU5-7Materi Aircraft Pin
- 5305-00-316-7741 MPN AIC812-6-7Machine Screw
- 5305-00-321-9139 MPN AIC822-06-5Socket Head Cap Screw
- 5305-00-680-5873 MPN BACB30LU4D17Machine Screw
- 5305-00-840-5962 MPN A1C617-1Externally Relieved Body Screw
- 5305-00-915-2526 MPN A1C792-3-11Machine Screw
- 5305-00-929-1621 MPN 51B222-23Machine Screw
- 5305-01-004-9520 MPN 965817-107CSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-880-9448 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3-3 | Huck Intl Inc |
AIC83-3-3 | Sps Technologies, Llc |
106334-3-3 | Sps Technologies, Llc |
VT1631-3-3 | Alcoa Global Fasteners, Inc. |
BA45132-3-3 | Huck International, Inc. |
202-15522-3-3 | Triumph Aerostructures, Llc |
106334-3-3 | Sps Technologies, Llc |
BA45132-3-3 | Huck Intl Inc |