NSN 5305-00-883-6492
High Torque Screw
Fleet ballistic missile quality as identified by quality conrtol no. Poso 910917.
Manufacturer part number NAS1204-28 for national stock number 5305008836492.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-883-6492.
-
MPN or Model
NAS1204-28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 2.057 inches and 2.081 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification all treatment responses -
Thread Series Designator
Unjf -
Specification Data
80205-nas1204 professional/industrial association standard -
Departure From Cited Designator
As mod by special features
More from these suppliers
- 5305-00-815-9410 MPN NAS1206-23Close Tolerance Screw
- 5305-01-053-1885 MPN NAS1190-08P36BSocket Head Cap Screw
- 5305-00-451-6526 MPN NAS1133-32Close Tolerance Screw
- 5305-01-058-5342 MPN NAS1101-06-17Machine Screw
- 5306-00-680-6547 MPN NAS1003-13AMachine Bolt
- 5306-00-827-2275 MPN NAS1003-2Machine Bolt
- 5305-00-990-4201 MPN NAS1190C4P6LSocket Head Cap Screw
- 5306-00-616-6968 MPN NAS1003-4AMachine Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-883-6492 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1204-28 | National Aerospace Standards |
NAS1204-28 | Eriks Southwest Inc |
NAS1204-28 | Apcom Inc |
NAS1204-28 | Nor-cal Supply Co.inc. |
NAS1204-28 | Hi-shear Corporation |
NAS1204-28 | Sps Technologies, Llc |
NAS1204-28 | Lisi Aerospace Canada Corp |
NAS1204-28 | Sps Technologies, Llc |
NAS1204-28 | Lawrence Engineering And Supply Inc |
NAS1204-28 | F And C Sales Inc |
NAS1204-28 | Collins Engineering Corp |
NAS1204-28 | Durham Aircraft Service Inc |
NAS1204-28 | Air Industries Co Inc |