NSN 5305-00-883-8757
High Torque Screw
Between 1.203 inches and 1.233 inches fastener length, flat countersunk head style, between 0.577 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number 7S28A5-11 for national stock number 5305008838757.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-883-8757.
-
MPN or Model
7S28A5-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.555 inches and 0.605 inches -
Fastener Length
Between 1.203 inches and 1.233 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unf -
Specification Data
80205-nas2810 professional/industrial association standard
More from these suppliers
- 1560-00-035-2981 MPN 165-17005-302Wing Slat Assembly
- 1560-00-513-5586 MPN 191-48285-1Aircraft Fairing
- 1680-00-694-7224 MPN 180-524110Rudder Control Plug
- 1680-00-702-9548 MPN 5927-25Out Seat Back Cover
- 1560-00-732-9855 MPN 6G1-11-0Air Ground Assembly
- 4920-00-860-6589 MPN 265-810081Test Adapter Kit
- 1680-01-166-2566 MPN LE182-0046-0001Push-pull Control Assembly
- 1680-01-174-4797 MPN LE162-0013-6337Armament Rod Assy
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-883-8757 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7S28A5-11 | Boeing Company, The |
NAS2805-11 | National Aerospace Standards |