NSN 5305-00-889-2929
High Torque Screw
Between 1.327 inches and 1.357 inches fastener length, flat countersunk head style, between 0.577 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS2805-13 for national stock number 5305008892929.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-889-2929.
-
MPN or Model
NAS2805-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.530 inches -
Fastener Length
Between 1.327 inches and 1.357 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
0.812 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas2805 professional/industrial association standard
More from these suppliers
- 5940-01-341-7797 MPN NAS1063B-1-5Terminal Board Marker Strip
- 5940-01-451-2677 MPN NAS1063E5-550CTerminal Board Marker Strip
- 5940-01-625-6054 MPN NAS1063C8-1Terminal Board Marker Strip
- 5305-00-007-1588 MPN NAS1102C02-6PMachine Screw
- 5305-00-007-9894 MPN NAS1102E04-10PMachine Screw
- 5305-00-051-5906 MPN NAS333C5Close Tolerance Screw
- 5305-00-053-0614 MPN NAS1100C04-14Machine Screw
- 5305-00-099-7881 MPN NAS1351-5H24PSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-889-2929 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2805-13 | National Aerospace Standards |
TS5A13 | Amsco Products |
5305008892929 | E.c.a Etablissement |