NSN 5305-00-889-6593
High Torque Screw
Between 0.985 inches and 1.015 inches fastener length, flat countersunk head style, between 0.577 inches and 0.625 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS1155-10 for national stock number 5305008896593.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-889-6593.
-
MPN or Model
NAS1155-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.350 inches and 0.400 inches -
Fastener Length
Between 0.985 inches and 1.015 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.625 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1155 professional/industrial association standard
More from these suppliers
- 5940-00-926-0022 MPN NAS705C4Stud Terminal
- 5940-00-243-7680 MPN NAS704T3Stud Terminal
- 5940-01-633-7510 MPN SAE81824/6Conductor Splice
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5305-00-053-1089 MPN MS35199-61Machine Screw
- 5305-00-054-8291 MPN MS21295-65Socket Head Cap Screw
- 5305-00-057-0514 MPN MS51958-17Machine Screw
- 5305-00-057-0517 MPN MS51958-20Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-889-6593 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1155-10 | National Aerospace Standards |