NSN 5305-00-890-0081
High Torque Screw
Between 1.073 inches and 1.103 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1203-13 for national stock number 5305008900081.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-890-0081.
-
MPN or Model
NAS1203-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 1.073 inches and 1.103 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1203 professional/industrial association standard
More from these suppliers
- 5305-00-419-3380 MPN NAS1124-23Close Tolerance Screw
- 5305-00-541-9045 MPN NAS1221-3-2Machine Screw
- 5305-01-016-8067 MPN NAS1190E08P16BSocket Head Cap Screw
- 5305-00-107-9221 MPN NAS1133E6Close Tolerance Screw
- 5305-00-420-6470 MPN NAS1133V24Close Tolerance Screw
- 5305-00-680-5412 MPN NAS1204-48Close Tolerance Screw
- 5305-01-110-7881 MPN NAS1101E02-18Machine Screw
- 5305-01-163-5752 MPN NAS1191E04T3LSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-890-0081 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1203-13 | Eriks Southwest Inc |
NAS1203-13 | Apcom Inc |
NAS1203-13 | Nor-cal Supply Co.inc. |
NAS1203-13 | National Aerospace Standards |
NAS1203-13 | Hi-shear Corporation |
NAS1203-13 | Sps Technologies, Llc |
NAS1203-13 | Lisi Aerospace Canada Corp |
NAS1203-13 | Alcoa Fastening Systems |
NAS1203-13 | Sps Technologies, Llc |
NAS1203-13 | Lawrence Engineering And Supply Inc |
NAS1203-13 | F And C Sales Inc |
NAS1203-13 | Collins Engineering Corp |
NAS1203-13 | Durham Aircraft Service Inc |
NAS1203-13 | Air Industries Co Inc |