NSN 5305-00-890-0100
High Torque Screw
Between 0.426 inches and 0.456 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS1204-2 for national stock number 5305008900100.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-890-0100.
-
MPN or Model
NAS1204-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 0.426 inches and 0.456 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification all treatment responses -
Thread Series Designator
Unjf -
Specification Data
80205-nas1204-2 professional/industrial association standard
More from these suppliers
- 4820-01-647-2890 MPN 118050Ball Valve
- 5305-00-007-9880 MPN NAS1100C04-5PMachine Screw
- 5305-00-007-9893 MPN NAS1102E04-13Machine Screw
- 5305-00-008-5892 MPN NAS1102E08-30Machine Screw
- 5305-00-043-0417 MPN NAS1124-1HClose Tolerance Screw
- 5305-00-052-6911 MPN MS24629-15Tapping Screw
- 5305-00-052-6914 MPN MS24629-34Tapping Screw
- 5305-00-052-7484 MPN MS35198-86Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-890-0100 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1204-2 | National Aerospace Standards |