NSN 5305-00-891-1719
High Torque Screw
Between 1.633 inches and 1.680 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.4985 inches and 0.4995 inches .
Manufacturer part number 66117H3-7 for national stock number 5305008911719.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-891-1719.
-
MPN or Model
66117H3-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.623 inches and 0.690 inches -
Fastener Length
Between 1.633 inches and 1.680 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Mac ps13145 fscm 76301 mfr ref all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-326-3905 MPN HT4013-4-12YShoulder Screw
- 5305-00-395-3440 MPN HT4024-L5-16-1Close Tolerance Screw
- 5305-00-457-2851 MPN F7500-8B5Panel Screw Assembly
- 5305-00-573-9714 MPN 11438307-6Panel Screw Assembly
- 5305-00-824-2465 MPN 3MA333FA6Close Tolerance Screw
- 5305-01-013-9600 MPN BM19031-7-29DClose Tolerance Screw
- 5305-01-053-5802 MPN C7985-5D4Close Tolerance Screw
- 5305-01-073-0954 MPN HT4008-4-8Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-891-1719 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
66117H3-7 | Sps Technologies, Llc |
HT195-3-7 | Alcoa Fastening Systems |
HT195-3-7 | Hi-shear Corporation |
HT195-3-7 | Lisi Aerospace Canada Corp |
66117H3-7 | Sps Technologies Inc |
HS2623-3Z7 | Huck International, Inc. |
HT195-3-7 | Satair A/s |
HS2623-3Z7 | Huck Intl Inc |