NSN 5305-00-891-1723
High Torque Screw
Between 0.690 inches and 0.737 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 66117H3-6 for national stock number 5305008911723.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-891-1723.
-
MPN or Model
66117H3-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.331 inches -
Fastener Length
Between 0.690 inches and 0.737 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Mac ps13145 fscm 76301 military specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-524-1125 MPN 100-161-6-4Materi Aircraft Pin
- 5305-00-382-1410 MPN NAS1101E08-20Machine Screw
- 5305-00-438-8760 MPN 135191-2Shoulder Screw
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-00-889-2990 MPN NAS1101C3H8Machine Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-044-7114 MPN BM19024-3-13Close Tolerance Screw
- 5305-01-055-3750 MPN NAS1101-06-22Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-891-1723 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
66117H3-6 | Sps Technologies, Llc |
HS2623-3Z6 | Huck International, Inc. |
HT195-3-6 | Alcoa Fastening Systems |
HT195-3-6 | Hi-shear Corporation |
HT195-3-6 | Lisi Aerospace Canada Corp |
3M263-3-6 | Boeing Company, The |
3M263-3-6 | Sps Technologies, Llc |
HT8115-3-6 | Alcoa Global Fasteners, Inc. |
HT195-3-6 | Satair A/s |
66117H3-6 | Sps Technologies Inc |
HS2623-3Z6 | Huck Intl Inc |