NSN 5305-00-891-1724
High Torque Screw
Between 1.451 inches and 1.498 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number 66117H5-16 for national stock number 5305008911724.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-891-1724.
-
MPN or Model
66117H5-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.441 inches and 0.508 inches -
Fastener Length
Between 1.451 inches and 1.498 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Mac ps13145 fscm 76301 mfr ref all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-417-5491 MPN 200995-2Extension Unit
- 5305-00-162-4064 MPN T150-08-9Machine Screw
- 5305-00-463-0257 MPN NAS1101C02-7BMachine Screw
- 5305-00-559-4899 MPN HS2623-7Z28YShoulder Screw
- 5305-00-915-2561 MPN NAS1124-4HClose Tolerance Screw
- 5305-01-045-3023 MPN HT4016-3-7YSocket Head Cap Screw
- 5305-01-141-7193 MPN 3M902C6-10AShoulder Screw
- 5305-01-142-6294 MPN HT4008-4-29Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-891-1724 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
66117H5-16 | Sps Technologies, Llc |
HS2623-5Z16 | Huck International, Inc. |
HT195-5-16 | Hi-shear Corporation |
HT195-5-16 | Lisi Aerospace Canada Corp |
3M263-5-16 | Boeing Company, The |
66117H5-16 | Sps Technologies Inc |
HS2623-5Z16 | Huck Intl Inc |
66117H5-16 | Sps Technologies, Llc |
3M263-5-16 | Boeing Company, The |
HT195-5-16 | Hi-shear Corporation |
66117H5-16 | Sps Technologies Inc |
HS2623-5Z16 | Huck Intl Inc |