NSN 5305-00-891-1727
High Torque Screw
Between 1.389 inches and 1.436 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number HT195-5-15 for national stock number 5305008911727.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-891-1727.
-
MPN or Model
HT195-5-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.441 inches and 0.508 inches -
Fastener Length
Between 1.389 inches and 1.436 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Mac ps13145 fscm 76301 mfr ref all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-507-2092 MPN LS15264V04-24Machine Screw
- 5305-00-541-9067 MPN NAS1189E08P7LSocket Head Cap Screw
- 5305-00-891-1719 MPN HS2623-3Z7Close Tolerance Screw
- 5305-00-919-5108 MPN NAS1164-14Close Tolerance Screw
- 5305-00-943-8137 MPN EL25-220Machine Screw
- 5305-01-043-5749 MPN BM19024-4-10Close Tolerance Screw
- 5305-01-047-4039 MPN HT4008-3-5Shoulder Screw
- 5305-01-105-1809 MPN HT4067-4-9Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-891-1727 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT195-5-15 | Hi-shear Corporation |
HT195-5-15 | Lisi Aerospace Canada Corp |
HT195-5-15 | Alcoa Fastening Systems |
HT8115-5-15 | Alcoa Fastening Systems |
66117H-5-15 | Sps Technologies, Llc |
HT8115-5-15 | Alcoa Global Fasteners, Inc. |
3M263-5-15 | Boeing Company, The |
HS2623-5Z15 | Huck International, Inc. |
3M263-5-15 | Sps Technologies, Llc |
66117H5-15 | Sps Technologies Inc |
HS2623-5Z15 | Huck Intl Inc |
66117H-5-15 | Sps Technologies, Llc |
HT8115-5-15 | Alcoa Fastening Systems |
HT195-5-15 | Alcoa Fastening Systems |
HT195-5-15 | Hi-shear Corporation |
3M263-5-15 | Boeing Company, The |
66117H-5-15 | Sps Technologies, Llc |
HT8115-5-15 | Alcoa Global Fasteners, Inc. |
66117H5-15 | Sps Technologies Inc |
66117H-5-15 | Sps Technologies, Llc |
HS2623-5Z15 | Huck Intl Inc |