NSN 5305-00-901-4400
High Torque Screw
Retaining element in shank.
Manufacturer part number VP1072-4-14 for national stock number 5305009014400.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-901-4400.
-
MPN or Model
VP1072-4-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.428 inches -
Fastener Length
1.303 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 0.875 inches and 0.981 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
39.0 rockwell c and 45.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.198 inches first hole and 1.218 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-196-8505 MPN CA28085-06-3Fastener Turnlock
- 5305-00-512-6435 MPN CA2654-4-12Close Tolerance Screw
- 5305-01-397-3356 MPN CA21088-10-6-9Setscrew
- 1560-00-109-2509 MPN 215-80401-1Flap Support
- 1560-00-243-6989 MPN CV21-658520-2Arm Assembly
- 5930-00-257-2084 MPN V3972-1RSensitive Switch Housing
- 1560-00-469-7135 MPN 216-29504-1Small Arms-fragmentation Protective Supplemental Armor
- 5935-00-822-0816 MPN CVC5891A104S6AElectrical Plug Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-901-4400 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VP1072-4-14 | Alcoa Global Fasteners, Inc. |
CA4850-04-14 | Arconic Global Fasteners & Rings, |
202-15500-4-14 | Triumph Aerostructures, Llc |