NSN 5305-00-901-4418
High Torque Screw
Retaining element in shank.
Manufacturer part number CA4850-04-27 for national stock number 5305009014418.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-901-4418.
-
MPN or Model
CA4850-04-27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.428 inches -
Fastener Length
2.116 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 1.688 inches and 1.704 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
39.0 rockwell c and 45.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.011 inches first hole and 2.031 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-535-6803 MPN CA17248-6-7-2Turnlock Receptacle
- 1560-01-541-5224 MPN TL18068-101B080Aircraft Latch Assembly
- 5305-01-046-8075 MPN CA30012-2LSocket Head Cap Screw
- 5305-01-094-6060 MPN CA2658-4-97Close Tolerance Screw
- 5305-01-194-3009 MPN CA28098-6Panel Screw Assembly
- 5935-00-024-0516 MPN CVC2614C16-20Electrical Connector Backshell
- 5930-00-057-3686 MPN 215-21106-1Rotary Switch
- 1560-00-132-6882 MPN 215-40045-65Aircraft Access Door
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-901-4418 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA4850-04-27 | Arconic Global Fasteners & Rings, |
VP1072-4-27 | Alcoa Global Fasteners, Inc. |
202-15500-4-27 | Triumph Aerostructures, Llc |