NSN 5305-00-902-4342
High Torque Screw
Between 0.511 inches and 0.541 inches fastener length, flat countersunk head style, between 0.269 inches and 0.279 inches head diameter, locking feature: patch threads or pellet threads or strip threads.
Manufacturer part number NAS1161-3 for national stock number 5305009024342.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-902-4342.
-
MPN or Model
NAS1161-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.363 inches and 0.413 inches -
Fastener Length
Between 0.511 inches and 0.541 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.269 inches and 0.279 inches -
Locking Feature
Patch threads or pellet threads or strip threads -
Grip Diameter
Between 0.1365 inches and 0.1375 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.138 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 fastener or steel comp e4340 fastener or steel comp 8740 fastener -
Material Specification
Mil-s-5626 military specification 1st material response fastener or mil-s-5000 military specification 2nd material response fastener or mil-s-6049 military specification 3rd material response fastener -
Surface Treatment
Cadmium fastener and chromate fastener -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response fastener -
Thread Series Designator
Unjc -
Specification Data
80205-nas1161 professional/industrial association standard
More from these suppliers
- 5305-00-182-9379 MPN LK1352-4LE12PSocket Head Cap Screw
- 5305-00-186-9234 MPN TS1352-02LL4PSocket Head Cap Screw
- 5305-00-954-4421 MPN LK1189-08P6Socket Head Cap Screw
- 5305-01-079-2462 MPN LK21295-68Socket Head Cap Screw
- 5940-01-393-8968 MPN NAS1063A10TB105AGTerminal Board Marker Strip
- 5940-01-425-6526 MPN NAS1063Terminal Board Marker Strip
- 5940-01-430-2097 MPN NAS1063B18-37Terminal Board Marker Strip
- 5940-01-451-4001 MPN NAS1063A10-105BSTerminal Board Marker Strip
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-902-4342 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1161-3 | National Aerospace Standards |
LK1161-3 | Torkon Fastener Corp |
Stock Check
- NS: 811
- NE: 860