NSN 5305-00-904-6843
Tap Bolt
1.125 inches fastener length, hexagon head style, between 0.302 inches and 0.323 inches head height, width between flats: between 0.736 inches and 0.750 inches .
Manufacturer part number MS35308-410 for national stock number 5305009046843.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-904-6843.
-
MPN or Model
MS35308-410
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.125 inches -
Fastener Length
1.125 inches -
Head Style
Hexagon -
Head Height
Between 0.302 inches and 0.323 inches -
Width Between Flats
Between 0.736 inches and 0.750 inches -
Thread Diameter
0.500 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Material
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 -
Material Specification
66 federal standard all material responses -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-430-6550 MPN M81511-18-22Electrical Connector Cover
- 5940-00-833-5836 MPN NAS1063A2-705Terminal Board Marker Strip
- 5305-00-068-5411 MPN MS16995-3Socket Head Cap Screw
- 5305-00-126-5146 MPN MS27039DD0814Machine Screw
- 5305-00-136-7445 MPN NAS1081-08D2NSetscrew
- 5305-00-151-2519 MPN MILS7839Machine Screw
- 5305-00-151-5678 MPN NAS1221-08-13Machine Screw
- 5305-00-156-2359 MPN MIL-S-7839Machine Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-904-6843 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35308-410 | National Aerospace Standards |
MS35308-410 | Military Standards |
Stock Check
- NS: 18
- NE: 771