NSN 5305-00-906-6546
High Torque Screw
Between 0.465 inches and 0.495 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 727901-1 for national stock number 5305009066546.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-906-6546.
-
MPN or Model
727901-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.229 inches and 0.279 inches -
Fastener Length
Between 0.465 inches and 0.495 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.216 inches and 0.236 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-010-1494 MPN 388504-7Aircraft Beam Assembly
- 1560-00-012-7817 MPN 3E12050-101Emergency Guide Impeller
- 4920-00-014-1534 MPN B073Adapter Plate
- 1560-00-017-8203 MPN 794809-1Wiring Tb4 Chart
- 1560-00-019-7334 MPN 389044-1Main Landin Upper Swivel Bracket
- 1560-00-025-5420 MPN 10-176262-6RAircraft Fairing
- 1560-00-029-0042 MPN 782099-1Torque Tube Support
- 1560-00-055-6816 MPN 765998-501Hor Stabilizer Assy
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-906-6546 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
727901-1 | Lockheed Martin Corporation |