NSN 5305-00-914-6126
Tap Bolt
Between 1.460 inches and 1.500 inches fastener length, hexagon head style, between 0.226 inches and 0.243 inches head height, width between flats: between 0.551 inches and 0.562 inches .
Manufacturer part number 7-115-161250 for national stock number 5305009146126.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-914-6126.
-
MPN or Model
7-115-161250
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 1.000 inches and 1.188 inches -
Fastener Length
Between 1.460 inches and 1.500 inches -
Head Style
Hexagon -
Head Height
Between 0.226 inches and 0.243 inches -
Width Between Flats
Between 0.551 inches and 0.562 inches -
Hole Diameter
0.062 inches -
Thread Diameter
0.375 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
23.0 rockwell c and 32.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Hole Configuration Style
Hexagon flats -
Material
Steel -
Material Specification
Sae gr 5 assn standard single material response -
Thread Series Designator
Unc
More from these suppliers
- 4820-01-319-2264 MPN 8925998Cartridge Assembly
- 5975-01-477-6405 MPN 7199002053Cable Strain Relief Bushing
- 4820-01-136-2451 MPN 1309690Plug Valve
- 5930-01-355-7119 MPN 1955680Push Switch
- 5940-01-360-3689 MPN 65679AXLug Terminal
- 5930-01-462-1321 MPN 3129161Sensitive Switch
- 5985-01-558-6380 MPN 3459355Antenna Support Base
- 5905-01-423-8063 MPN 2HS183Inductive Wire Wound Fixed Resistor
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-914-6126 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7-115-161250 | Grove U.s. L.l.c |
5HS628 | Oshkosh Corporation |
MS51095-362 | Military Standards |