NSN 5305-00-915-2126
High Torque Screw
Between 0.363 inches and 0.393 inches fastener length, flat chamfer head style, between 0.357 inches and 0.375 inches head diameter, head height: between 0.133 inches and 0.150 inches .
Manufacturer part number NAS1124-1 for national stock number 5305009152126.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-915-2126.
-
MPN or Model
NAS1124-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 0.363 inches and 0.393 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.357 inches and 0.375 inches -
Head Height
Between 0.133 inches and 0.150 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
0.062 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1124 professional/industrial association standard
More from these suppliers
- 5935-01-589-4826 MPN NAS6606-50Electrical Receptacle Connector
- 5940-01-658-0448 MPN NAS1063C3-300ATerminal Board Marker Strip
- 5305-00-053-5458 MPN NAS1402-42Machine Screw
- 5305-00-054-6869 MPN MS51031-48Setscrew
- 5305-00-061-0042 MPN NAS1635-06-24PMachine Screw
- 5305-00-071-1772 MPN MS90725-119Hexagon Head Cap Screw
- 5305-00-097-4583 MPN NAS604-32PMachine Screw
- 5305-00-144-3838 MPN MILS7839Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-915-2126 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1124-1 | National Aerospace Standards |