NSN 5305-00-915-2543
Bolt Stove
1.375 inches fastener length, flat countersunk head style, between 0.270 inches and 0.332 inches head diameter, internal drive style: torque set.
Manufacturer part number NAS1102-08-22 for national stock number 5305009152543.
Datasheet
-
Product description
Machine Screw NSN 5305-00-915-2543.
-
MPN or Model
NAS1102-08-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.313 inches and 1.375 inches -
Fastener Length
1.375 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.270 inches and 0.332 inches -
Internal Drive Style
Torque set -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
Between 36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp e4340 or steel comp 8740 or steel comp 8735 or steel comp 6150 or steel comp 4140 or steel comp 4037 -
Screw Surface Treatment
Cadmium and chromate -
Screw Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification all treatment responses -
Thread Series Designator
Unc
More from these suppliers
- 5940-01-057-4124 MPN NAS1389-3Conductor Splice
- 5940-01-451-4001 MPN NAS1063A10-105BSTerminal Board Marker Strip
- 5305-00-043-3642 MPN MS51964-37Setscrew
- 5305-00-052-6891 MPN MS35198-53Machine Screw
- 5305-00-053-1091 MPN MS35199-65Machine Screw
- 5305-00-068-7053 MPN NASM35202-43Machine Screw
- 5305-00-182-9569 MPN MS21096-08002Socket Head Cap Screw
- 5305-00-205-3920 MPN NAS333CPA62Close Tolerance Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-915-2543 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1102-08-22 | National Aerospace Standards |